Eager Beaver
Eager Beaver 1:35 scale 3D printed model
The Eager Beaver was an air portable rough terrain Fork Lift Truck that was used by the Army, Royal Air Force and Royal Marines from the 1960s to the late 1980s. Two Eager Beavers were part of the Royal Marines assault squadrons that were deployed to the Falklands onboard HMS Fearless and Intrepid in April 1982.
The model is produced as a 3D printed kit by Pete Harvey of phd-design-etchings and contains over 90 parts.
Eager Beaver
Land Rover 24V - Red Arrows
Land Rover 24V - Red Arrows
Land Rover ½ ton Lightweight - Red Arrows ground support team.
This is a 1:24 scale 3D printed kit which is produced by PHD-Design-etchings and consists of over 50 printed parts. The only additions to the model are the tie-down strap on the spare wheel and the orange beacon, both of which I designed and printed.
Land Rover 24V - Red Arrows
Land Rover forward control GS
Land Rover forward control GS
Mike has just finished a 3D printed vehicle model of a Land Rover forward control GS, which consists of approximately 80 individual items when printed.
Below you will see a couple of views of the unpainted printed components; plus, some of the build activity; followed by views of the finished model.
A synopsis of the build:
"This kit is a resin 3D model that has been downloaded as an STL file from Peter Harvey of https://phd-design-etchings.co.uk/ . The components have been printed on an Anycubic Mono M5s which is a liquid resin printer.
As the model is produced as a set of STL (stereolithography) files they can printed to most of the popular scales, such as 1:76; 1:48: 1:35 and 1:24 scale. I have chosen 1:24 scale for this build as much more detail can be shown at that larger scale."
Land Rover forward control GS
Land Rover ½ ton Lightweight
1:35 scale 3D Printed model kit produced by PH Designs
This is a complete kit and contains around 50 pieces, including chassis, engine, gearbox, body, suspension and wheels.
There will be two version of this kit, a 12v GS version and a 24v FFR version.
Please use the button below to see more PH Designs products
Land Rover ½ ton Lightweight
The TACR2 (Truck, Airfield, Crash, Rescue) 1:35 Scale
1/35 Land Rover Ambulance (WIP)
Mike has just started this build of a Land Rover Ambulance.....
Mike has just started this build of a Land Rover Ambulance.....
Mike has just started this build of a Land Rover Ambulance.....
.....He plans to build this in Desert Tan
Mike has just started this build of a Land Rover Ambulance.....
Mike has just started this build of a Land Rover Ambulance.....
WIP - 1/35 Singapore Street Scene
AEC Matador aircraft refueler - 1/144
Mike has drawn and 3D printed two AEC Matador aircraft refuelers; one wartime hose type and the other post-war boom type. The models are printed to 1:144 scale.
Photo Gallery
Welsh Models 1:144 Short Belfast
Welsh Models 1:144 Short Belfast vacform kit with a scratchbuilt Bristol Bloodhound missile and trailer
Welsh Models 1:144 Short Belfast
Airfix Boeing 737-200 - China Air
Airfix Boeing 737-200 - China Air
Airfix Boeing 737-200 - China Air
HMS Ark Royal - 1:144
The finished model of the Ark Royal will be a waterline build and there are seven deck levels from the waterline up to the flight deck. There are four more decks above the flight deck, for the bridge/island superstructure; atop which will be the funnel and masts etc.
Mike is making this model using a combination of Scra
Build Section 1 Images - Scratch and 3d Printed
